Motor assembly and disassembly steps and methods

      Before disassembly, the site should be cleaned, tools should be prepared, and the joints, end caps and casings, bearing caps and end caps should be marked to avoid mistakes during assembly. The general steps for removing the motor are as follows:

      1. Remove the belt or disconnect the coupling pin of the coupling;

      2. Remove the power wiring and grounding wire in the junction box;

      3. Remove the pulley or coupling;

      4. Remove the foot nut and washer;

      5. Remove the front bearing cover;

      6. Remove the front end cover;

      7. Remove the fan blade cover;

      8. Remove the blades;

      9. Remove the rear bearing cover;

      10. Remove the rear end cover;

For more information and purchase please visit: https://www.supplyforever.com