1. The continuous running time of the engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. Engraving machine
2. Every time the machine is used, the engraving machine should be cleaned. It is necessary to clean the dust on the platform and the transmission system. Regularly (weekly) lubricate the transmission system (X.Y.Z three-axis).
3. If the engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.
4. The engraving machine cleans the dust inside the electrical box regularly (depending on the use) and checks whether the screw of the terminal is loose to ensure the safe and reliable use of the circuit.
5. The engraving machine periodically checks (depending on the use) whether the screws of the various parts of the machine are loose.
