The wood engraving machine is not evenly carved, and the depth of the knife is shallow. What is the problem?

When the woodworking engraving machine is processed, in normal terms, the depth is based on the design of the map in advance. For example, the lower knife should be 0.5cm, and the actual engraving depth is 0.5. However, when there was a problem, it was found that there were some places where the 0.5 was 0.2, and some places even reached 1. This is a headache.

If you find a problem, if you want to solve the problem, you must first understand where the problem has occurred. Generally, the wood carving machine is unevenly carved, which is generally the following aspects:

1. The control card is loose or faulty

2. Step near motor failure

3. Driver failure or current breakdown is inconsistent with software settings

4.z axis motor line failure

5. Spindle motor failure

6. Inverter interference or data setting is incorrect

7. Static interference

8. Computer virus or system problem

Woodworking engraving machine has this kind of failure, the best solution is to check. Most of them are discharged according to the actual situation, and then checked one by one. Of course, the first problems with the driver, motor, inverter, etc., it is better to find a better solution.