Choosing the right carpenter engraving machine tool Carpenter engraving machine is now spread all over the carpenter's profession.
From general single-head carpenter engraving machines, multi-head embossing machines, to multi-process carpenter engraving machines, carpenter machining centers and other types of carpenter engraving machines can not avoid the choice of tools.
Then, if you choose the right tool to use the most valuable carpenter engraving machine function, forward power?
The carpenter's engraving machine tool determines the quality of the engraving and the engraving effect to a certain extent.
Just like a good car needs a good tire to have a good braking effect, the engraving machine is the same, the carpenter engraving machine needs good quality and the right tool is enough to engrave high quality products.
The main elements of the engraving function are: tool data, tool type, machining parameters, and grinding technology.
1. The sharpness and mirror effect of the tool affect the cutting force. The sharper the tool, the smaller the machining resistance, the smoother the machine drive, the higher the surface quality, but the lower the durability of the tool. Therefore, the selection of good tool bar data is also the key factor. Grinding wheel quality. Good quality sand
The wheel is capable of grinding a cutting edge with a fine mirror surface, which can effectively advance the durability and sharpness of the tool.
2 The high quality grinding wheel can grind the mirrored rear cutting edge and advance the mirror surface effect of the cutting surface. After understanding the influence of the carpenter engraving machine tool on the engraving quality, the operator can select the tool sensitively according to the engraving process, try to select the tool with high quality data, and operate according to his own needs in the grinding process, select the good quality grinding wheel.
3 This can reach the better use of the cost of the tool, if you use the defective tool cheaply, it will not only form a rough cut, but if you break the knife, it may cause product defects.
