When we need to engrave some stone and MDF, we will use stone engraving machine. Therefore, the application range of computer engraving machine is quite extensive. However, it is important that if you do not pay attention to the maintenance of the machine during use, it will cause the machine to malfunction and affect the normal use function. Therefore, in order not to affect the function of the stone engraving machine, it is very important to maintain its care.
First, users should defragment the operating system on a regular basis and optimize the computer system. It is necessary to periodically check the system for viruses, but remember that you cannot open the anti-virus program at work, because it is very easy to be interfered with when you work.
Secondly, after the engraving work is completed, it is necessary to pay attention to the neatness and cleanness of the stone engraving machine for the convenience of the next work. Care should be taken to periodically clean some of the material from the rails to prevent debris from interfering with the engraving machine.
Then, the dust on the chassis should also be remembered to be cleaned regularly, which can ensure the good heat dissipation, and can prevent the industrial card from abnormal errors. When the stone engraving machine is not in use, it is better to pour off the water in the water tank when the room temperature is relatively low to prevent the cracking phenomenon.
Finally, periodically check the standard applicable temperature of the oil to be added. At least ensure that it has the lowest temperature. The lead screw should also be cleaned regularly to prevent dirt from sticking.
As long as we do the maintenance work mentioned above, we can reduce the frequency of failure of the stone engraving machine, and can guarantee the life of the engraving machine, and serve us better.
