Woodworking engraving machines inevitably wear out during daily work. In order to improve the service life and working ability of the woodworking engraving machine, it must be ensured that the maintenance and maintenance work of the woodworking crane is maintained on weekdays. Maintaining maintenance and maintenance work is always a constant investment in the engraving machine, and it is essential to ensure the quality and efficiency of the woodworking engraving machine. Next, follow the CNC network Xiaobian to learn about the work wear of woodworking engraving machine. The related content of woodworking engraving machine "work injury" maintenance!
After one day's work is completed, first remove the engraving knife, and let the spindle chuck and lock nut are in a relaxed state. This helps to extend the life of the spindle chuck. Then we began to clean the work surface, can be cleaned with a brush; pay attention to the work surface is usually not to accumulate debris, so as to avoid deformation of the platform.
First, check the screws on the parts of the wood engraving machine regularly for looseness.
Second, regularly clean the dust inside the electrical box of the woodworking engraving machine and check whether the screw of the terminal is loose to ensure the circuit is safe and reliable.
Third, if you do not use woodworking engraving machines for a long time, you should periodically refuel every week, preferably for each week, to ensure the flexibility of the transmission system.
Fourth, the woodworking engraving machine is required to have a continuous running time of 10 hours/day or less; to ensure the cleaning of the cooling water and the normal operation of the water pump, the water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. As many circulating water as possible, you can change the large capacity water tank.
Fifth, every time you use the woodworking engraving machine, you must pay attention to cleaning. The dust on the platform and the transmission system must be cleaned up; the lubrication of the X, Y and Z axes of the transmission system should be regularly refueled.
Sixth, the operator should wear dust masks and safety glasses when operating the wood engraving machine to avoid intrusion of dust and the like generated during processing.
Seventh, when choosing a woodworking engraving machine, it is best to choose a large brand of woodworking engraving machine. For example, like a carving engraving machine, the machine tool of this brand engraving machine may be equipped with a single machine vacuuming and dust collecting device.
Eighth, the daily maintenance method of the woodworking engraving machine should be added to the woodworking engraving machine with a certain dust-proof dust-removing device, and the dust-removing equipment should be selected for use.
The door of the electric control box should be opened as little as possible to stop the door opening operation. During the engraving, there will be dust, wood chips or metal powder in the air. Once they fall on the circuit board or electronic device in the electric control box, it is easy to cause the components. Insulation resistance drops, and even components and boards are damaged. 2. Check regularly whether the screws of the parts of the machine are loose.
Maintenance of the inverter: The inverter has been commissioned before leaving the factory. It is forbidden to debug and change the line privately to avoid damage to the motor or inverter caused by data input error. 2. Regularly clean the heat dissipation and ventilation system of the circuit box. Please check the operation of each fan on the electric control box regularly. Regularly vacuum the dust in the electric control box and check whether the terminal screws are loose to ensure the circuit is safe and secure. use.
