How to remove noise from stone engraving machine

Stone engraving machine---has maintained a strong vitality since the twentieth century, which has made China's engraving equipment develop rapidly and ranks among the world's largest stone engraving machine manufacturers. In the past two years, the export of stone engraving machines seems to have not been affected by the financial crisis, and it still maintains the momentum of continued growth. As a kind of numerical control tool, the stone engraving machine can easily complete accurate digital positioning and run smoothly, and the precision is more than ten times higher than that of traditional equipment. Especially when doing gravity stone arc, it shows the numerical control. The strength of the equipment is greatly convenient for the users. It is unmatched by traditional tools, so it is well received by the majority of stone users.
Here are some noise questions for the stone engraving machine:
The stone engraving machine generally uses a stepping motor. The stepping motor has a pause every step of the way, and the noise is normal. At a certain frequency, the stone engraving machine will also generate resonance of the body and emit obvious noise. This type of noise does not affect the normal use of the machine.
The noise that affects and is harmful to the stone engraving machine is mainly manifested in the following two categories:
1. The abnormality noise is emitted when the spindle motor of the stone engraving machine is running.
The generation of such noise proves that there is a quality problem in the spindle bearing of the stone engraving machine or the service life of the spindle bearing has arrived, or the quality is degraded or damaged after the wear, and the replacement can be considered at this time.
2. The stone engraving machine emits an abnormal sound when walking axially.
Stone engraving machines are mostly found on the X-axis. Mostly the axial motor bearing is damaged or the X-axis guide rail lacks lubricating oil, dirty, too tight, ball wear, ball drop, etc., must be handled in time.

Woodworking engraving machine has a quick engraving

In the process of engraving, the engravings are often misplaced, and we are often annoyed to tell our customers that their items have been damaged during the engraving process.
Again, in order to avoid these problems, we explain the following by the following operations:
1. Check if the pliers or chucks used for engraving are used incorrectly. At the same time, the wear of the pliers or chucks of the wood engraving machine will also cause the misalignment of the engraved objects. If the pliers or the chuck is too tight, the moment the blade touches the engraved object will also cause the engraving to pop out.
2. For those irregularly shaped engraved objects, the surface seems to have been fixed very tightly, and will also sway back and forth when subjected to downforce. At this point, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or try to fix the part of the rule and discard its irregular parts.
3. If the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the diamond head of the engraving machine moves too much during the engraving process, the pressure on the side of the tool will cause the engraving. The movement. If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knife will drill deep into the material, causing the material to move during the engraving process.
4. Since the woodworking engraving machine is often equipped with multi-function pliers or chucks, and they are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber pipes. It is helpful to fix the engraved object.
5. For engraving plastic patterns, you can attach the transfer tape to the back of the engraved object, then spray the liquid glue on the side with the tape attached, and then attach it to a surface that can be discarded. This avoids the use of double-sided. Glue, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved strap, the side of the strap is more viscous than the other side, so the plate can be moved or replaced at will....

What should I master when using woodworking engraving machine?

Because many customers have never used an engraving machine before buying an engraving machine. As a newbie, you should pay attention to the following problems when learning the engraving machine.
1. Theoretical basis: The training work must start from the theoretical training work, and the operators must conduct practical operation training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.
2. The use of woodworking engraving tools: After the theoretical training, the training of the tools must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.
3, the scope of application of the material: operators must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.
4. Operation of various software of woodworking engraving machine: After the above training, software training can be carried out. The training of the software is mainly concentrated in the field of user application; the aspects that are not required by the user can be self-learned according to the training manual. The software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.
5. Machine operation training: After the above various trainings, after the training personnel explained and the operator's understanding and assessment: the operator's operation safety and operation precautions are trained, and the trainees in the operation safety matters After the signature is approved, the operator can perform machine operation training.
6, woodworking engraving machine operation of various precautions and training of engraving machine maintenance.

How to use stone engraving machine safely?

    We know that stone engraving machines are mostly used in the processing business. The processing business has a large workload and is prone to mechanical failure. Therefore, how to use the stone engraving machine correctly is particularly important. Now, let me know the correct use of the stone engraving machine. The way.
    (1) Working environment
    The stone engraving machine is a high-tech mechatronics equipment, and the advertising plasma machine has certain requirements for the working environment.
    1. Avoid equipment such as strong electricity and strong magnets that seriously affect the signal transmission of the engraving machine. Such as: welding machine, tower, etc.
    2. Use a three-core power supply to ensure good grounding of the engraving machine and reduce interference.
    3. The voltage requirements are stable, avoid large fluctuations, and it is best to use a voltage regulator.
    4. The machine should not work for a long time in a strong acid or alkali environment.
    (2) Maintenance and maintenance
    The engraving machine is mostly used for processing business, and the powder and dust generated by the processing are more. Therefore, pay attention to the maintenance and maintenance of the stone engraving machine. During use, care should be taken to keep the screws, guides and other components clean and lubricated, clean the dust and fuel the transmission components in time; the operator should clean and refuel in time, and it is forbidden to plug in.
    (3) Software use
    The engraving machine has a wide range of engraving software available. Such as: Wentai carving, Casmate-pro, Caxa, Mastercam, Artcam, Smartcam, Type3, etc. In order to meet your engraving requirements, please use the correct operating software.
    (4) Processing problems
    1. The rationality of the processing technology
    The machining accuracy is also important in addition to the engraving machine. In order to ensure the accuracy of the processing, please pay attention to the rationality of the processing technology.
    2. Tool use
    The machining accuracy is affected by the manufacturing process and accuracy of the tool itself. Therefore, select the tool that is suitable for machining during machining.
    3. Operator
    The proficiency and responsibility of the operators also have a significant impact on the machining accuracy. The customer's operator requires a technical secondary school or above, and has a proficient computer operation basis. In the training process, it is mainly necessary to master different carving speeds for different materials and use different tools. This often requires the accumulation of experience. Mastering well is good for extending the life of machines and tools.

How much do you know about the maintenance of the engraving machine?

1. The continuous running time of the engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. Engraving machine
2. Every time the machine is used, the engraving machine should be cleaned. It is necessary to clean the dust on the platform and the transmission system. Regularly (weekly) lubricate the transmission system (X.Y.Z three-axis).
3. If the engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.
4. The engraving machine cleans the dust inside the electrical box regularly (depending on the use) and checks whether the screw of the terminal is loose to ensure the safe and reliable use of the circuit.
5. The engraving machine periodically checks (depending on the use) whether the screws of the various parts of the machine are loose.

How to maintain the stone engraving machine?

    When we need to engrave some stone and MDF, we will use stone engraving machine. Therefore, the application range of computer engraving machine is quite extensive. However, it is important that if you do not pay attention to the maintenance of the machine during use, it will cause the machine to malfunction and affect the normal use function. Therefore, in order not to affect the function of the stone engraving machine, it is very important to maintain its care.


    First, users should defragment the operating system on a regular basis and optimize the computer system. It is necessary to periodically check the system for viruses, but remember that you cannot open the anti-virus program at work, because it is very easy to be interfered with when you work.


    Secondly, after the engraving work is completed, it is necessary to pay attention to the neatness and cleanness of the stone engraving machine for the convenience of the next work. Care should be taken to periodically clean some of the material from the rails to prevent debris from interfering with the engraving machine.


    Then, the dust on the chassis should also be remembered to be cleaned regularly, which can ensure the good heat dissipation, and can prevent the industrial card from abnormal errors. When the stone engraving machine is not in use, it is better to pour off the water in the water tank when the room temperature is relatively low to prevent the cracking phenomenon.


    Finally, periodically check the standard applicable temperature of the oil to be added. At least ensure that it has the lowest temperature. The lead screw should also be cleaned regularly to prevent dirt from sticking.


    As long as we do the maintenance work mentioned above, we can reduce the frequency of failure of the stone engraving machine, and can guarantee the life of the engraving machine, and serve us better.

Stone carving machine use precautions

  There are many factors in the speed of engraving. The first thing that can't be set is the configuration of the machine itself, the power of the finishing. There is also the skillful mastery of the technology, the choice of the tool, the material of the stone, etc.


   With the wide application of stone engraving machines, more and more customers who are just beginning to understand the CNC stone engraving machine often ask: "How about the speed of engraving, how long does it take to engrave a square?"


   There are many factors in the speed of engraving. The first thing that can't be set is the configuration of the machine itself, the power of the finishing. There is also the skillful mastery of the technology, the choice of the tool, the material of the stone, etc.


1. Theoretical basis: The training work must start from the theoretical training work, and the operators must conduct practical operation training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.


2, the use of stone engraving machine tools: After the theoretical training, the tool training must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.


3, the scope of application of stone: operators must be familiar with the application range of various materials, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.


4. Operation of various software of stone engraving machine: After the above training, software training can be carried out. Software training is mainly concentrated in the field of user applications; software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.


1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.


Second, each time the machine is used, it is necessary to pay attention to cleaning. It is necessary to clean the dust on the platform and the transmission system, and regularly and weekly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis polished rods are maintained with engine oil; screw parts are added with high-speed butter; in winter, if the working environment is fully automatic, the temperature of the computer engraving machine is too low, and the screw rods, polished rods (square rails or circular guides) should be Flush and clean with gasoline, then add the oil, otherwise the resistance of the machine transmission will be too large and the machine will be misaligned.)


Third, protect the electrical appliances
The inspection is to cut off the power supply. After the monitor has no display and the main circuit power indicator is off, the computer wood engraving machine can be carried out.